國立成功大學	機械工程學系	助理教授	2024/02~迄今
國立成功大學	馬達科技研究中心	助理研究員	2023/08~2024/01
國立成功大學	馬達科技研究中心	副主任	2016/11 ~2017/10
國立成功大學	馬達科技研究中心	博士後研究員	2014/11 ~ 2023/07

1.系統建模與控制
2.感測器與致動器

1	P. Huangand M. Tsai, "Design of a Magnet-Switching Actuator With High Efficiency and Auto-Locking Function," Magnetics, IEEE Transactions on, vol.48, no.11, pp.4622,4625, Nov. 2012
2	P. Huangand M. Tsai, "Investigation of V-Shaped Line Start Permanent Magnet Motors Based on Reactance Effect," Magnetics, IEEE Transactions on , vol.49, no.5, pp.2311,2314, May 2013
3	W. Tai; M. Tsai; Z. Gaing;P. Huang and Y. Hsu, "Novel Stator Design of Double Salient Permanent Magnet Motor," Magnetics, IEEE Transactions on , vol.50, no.4, pp.1,4, April 2014
4.	P. Huangand M. Tsai, "Actuator Design Based on Flux Path Switching for High Energy Utilization," in Magnetics, IEEE Transactions on , vol.51, no.11, pp.1-4, Nov. 2015
5.	P. Huang, M. Tsai and I. Jiang, "3-D Structure Line-Start Synchronous Reluctance Motor Design Based on Selective Laser Melting of 3-D Printing," in IEEE Transactions on Magnetics, vol. 54, no. 11, pp. 1-4, Nov. 2018, Art no. 8206604.
6.	P. Huang, I. Jiang, M. Tsai and G. Chen, "New Hybrid Stator Design for High-Speed PMSMS Based on Selective Laser Melting of 3-D Printing," in IEEE Transactions on Magnetics, vol. 55, no. 7, pp. 1-4, July 2019, Art no. 8203404.
7.	S. T. Wu, P. W. Huang, T. W. Chang, I. H. Jiang and M. C. Tsai, "Application of Magnetic Metal 3-D Printing on the Integration of Axial-Flow Impeller Fan Motor Design," in IEEE Transactions on Magnetics, vol. 57, no. 2, pp. 1-5, Feb. 2021, Art no. 8201205.
8.	T. W. Chang, P. W. Huang and et al., "Fabrication of Non-Contact Magnetic Screws by Additive Manufacturing," in IEEE Transactions on Magnetics, vol. 58, no. 8, pp. 1-5, Aug. 2022, Art no. 8001805, doi: 10.1109/TMAG.2022.3149627.
9.	T. A. Huynh, J. X. Peng, M. F. Hsieh and P. W. Huang, "Anti-Demagnetization Analysis of Fractional Slot Concentrated Windings Interior Permanent Magnet Motor Considering Effect of Rotor Design Parameters," in IEEE Transactions on Magnetics, vol. 58, no. 2, pp. 1-6, Feb. 2022, Art no. 8201606, doi: 10.1109/TMAG.2021.3090319.
10.	T. A. Huynh, Y. T. N. Le, Z. Lee, M. C. Tsai, P. W. Huang and M. F. Hsieh, "Influence of Flux Barriers and Permanent Magnet Arrangements on Performance of High-Speed Flux-Intensifying IPM Motor," in IEEE Transactions on Magnetics, doi: 10.1109/TMAG.2023.3290538.
11.	P. W. Huang, T. W. Chang, W. H. Yang, Y. C. Wu and M. C. Tsai, "A Novel S-Shape Offset Type of a Modulated Ferromagnetic Pole Piece Design for a Pseudo Direct Drive Motor," in IEEE Transactions on Magnetics, doi: 10.1109/TMAG.2023.3290599.
12.	T. W. Chang, P. W. Huang, W. C. Huang, C. C. Huang, C. C. Mo and M. C. Tsai, "Additive Manufacturing High Fault-tolerant Axial Flux Variable Reluctance Resolver," in IEEE Transactions on Magnetics, doi: 10.1109/TMAG.2023.3290606.

1.	Po-Wei Huang, Shang-Hsun Mao, Mi-Ching Tsai, Cheng-Tsung Liu, ” Investigation of Line Start Permanent Magnet Synchronous Motors with Interior-Magnet Rotors and Surface-Magnet Rotors” ,International Conference on Electrical Machines and Systems 2008, Aug. 2008. Wuhan, China.
2.		Po-Wei Huang, Shang-Hsun Mao, Mi-Ching Tsai, “Reactance effect of a line start permanent magnet motor,” The 19th Soft Magnetic material Conference, Sep. 2009. Torino, Italy.
3.		Po-Wei Huang, Mi-Ching Tsai, M.Y. Cheng, “Analysis of Iron Losses in a wheel motor with high quality silicon steel plates,” The SICE Annual Conference 2010, Aug. 2010. Taipei, Taiwan.
4.		Po-Wei Huang, Shang-Hsun Mao and Mi-Ching Tsai, “Investigation of Inductance Variation with Rotor Eccentricity for Permanent Magnet Motors,” International Conference on Electrical Machines and Systems 2010, Sep. 2010. Seoul, Korea.
5.		Po-Wei Huangand Mi-Ching Tsai, “Magnetic-controlled Actuators with Auto-locking Function for On-body Power Assistive Devices ,” The 20th Soft Magnetic material Conference, Sep. 2011. Kos, Greece.
6.		Po-Wei Huang andMi-Ching Tsai, "Design of a Magnet-Switching Actuator With High Efficiency and Auto-Locking Function," Intermag 2012,. May. 2012. Vancouver, Canada.
7.		Po-Wei Huang andMi-Ching Tsai, “Investigation of V-Shaped Line Start Permanent Magnet Motors Based on Reactance Effect,” 15th Biennial IEEE Conference on Electromagnetic Field Computation, Oct. 2012. Oita, Japan.
8.		Po-Wei Huangand Mi-Ching Tsai, “Design of a high energy utilization efficiency actuator based on a flux path switching device,” The 21th Soft Magnetic material Conference, Sep. 2013. Budapest, Hungary.
9.		Po-Wei Huangand Mi-Ching Tsai, "Actuator Design Based on Flux Path Switching for High Energy Utilization," Intermag 2015, May. 2015. Beijing, China.
10		Guan-Min Tseng, Mi-Ching Tsai,Po-Wei Huangand Wen-Hsi Lee," A Magnetic Coupling Design Based On Additive Manufacturing,”ICEMS 2015,. Oct. 2015. Pattaya, Tailand.
11		Zhi-Yong Zhang, Mi-Ching Tsai,Po-Wei Huangand Chung-Wei Cheng, " Investigation of Transversally and Axially Laminated Anisotropic Synchronous Reluctance Motor Based on 3D Printing” ICEMS 2015,. Oct. 2015. Pattaya, Tailand.
12		Z. Zhang, K. J. Jhong, C. Cheng, P. Huang, M. Tsai and W. Lee, "Metal 3D printing of synchronous reluctance motor," 2016 IEEE International Conference on Industrial Technology (ICIT), Taipei, 2016, pp. 1125-1128.
13		M. Tsai, Y. Wu, C. Chan, P. Cai, P. Huangand M. Tsai, "Integrated Design of Magnetic Gear and Electric Motor for Electric Vehicles," 2016 International Conference of Asian Union of Magnetics Societies (ICAUMS), Tainan, 2016, pp. 1-4.
14		P. Huang, Z. Zhang, W. Lin and M. Tsai, "Investigation of reluctance integrated starter/generator based on higher rotor pole number and dual air gaps design," 2016 19th International Conference on Electrical Machines and Systems (ICEMS), Chiba, 2016, pp. 1-4.
15		G. Tseng, K. Jhong, M. Tsai, P. Huangand W. Lee, "Application of additive manufacturing for low torque ripple of 6/4 switched reluctance motor," 2016 19th International Conference on Electrical Machines and Systems (ICEMS), Chiba, 2016, pp. 1-4.
16		P. Huang, M. Tsai and C. U. Ubadigha, "Investigation of high power density permanent magnet integrated starter/generator based on dual air-gap design," 2017 20th International Conference on Electrical Machines and Systems (ICEMS), Sydney, NSW, 2017, pp. 1-4.
17		M. Tsai, P. Huangand M. Tsai, "Research of Axial-Radial Flux Permanent Magnet Integrated Starter/Generator Based on Dual Air-Gap Design," 2018 21st International Conference on Electrical Machines and Systems (ICEMS), Jeju, 2018, pp. 261-264.
18.		K. L. Hsu, I. H. Jiang, P. W. Huang, C. U. Ubadigha and M. C. Tsai, "Investigation of Dual Stator Design for Integrated Starter-Generator with X-Shape Magnets," 2020 23rd International Conference on Electrical Machines and Systems (ICEMS), Hamamatsu, Japan, 2020, pp. 1-4,
19.		P. W. Huang, I. H. Jiang, T. W. Chang, H. H. Huang, C. U. Ubadigha and M. C. Tsai , "Design and Implementation of New Axial-Radial Bevel Magnetic Gear Based on Magnetic 3D Printing," 2021 IEEE International Magnetic Conference (Intermag), Lyon, France, May. 2021.
20.		P.W. Huang, T. W. Chang, C. U. Ubadigha, C. C. Chang,I. H. Jiang, M. F. Hsieh and M. C. Tsai, "Centrifugal Pump Integrated Axial Flux Switching Permanent Magnet Motor Based on Magnetic 3D Printing," 2022 Joint MMM-Intermag Conference, New Orleans, United States, Jan. 2022.

光纖雷射積層系統研發於馬達設計應用	科技部	2014-2020
高效能電磁鋼片應用於車用馬達發電機一體式設計	中鋼-科技部	2015-2017
400W及750W伺服馬達開發	東元電機	2014-2015
車用一體式磁性齒輪電機驅動系統整合設計	科技部	2015-2019
直流無刷馬達與驅控模組關鍵技術計畫	金屬中心	2016-2017
電助車中置式無刷馬達與減速齒輪模組之設計	巨大機械	2017-2018
新世代車用動力驅動關鍵模組整合設計之智能化平台建置	中鋼-科技部	2018-2021
電動機車馬達驅控整合技術	光陽工業	2019-2019
吊扇馬達性能改善設計與分析	閎博股份	2019-2020
永磁同步馬達驅動技術研究	朝程工業	2019-2020
直驅永磁複合馬達共同開發設計	東元電機	2020-2021
繞線式轉子電機應用於小型電動載具研究	大亞電線電纜	2022-2023
高性能車用馬達前瞻技術分析與開發設計	中鋼	2022-2023
高性能商用電動載具馬達開發與應用	中鋼	2023-2024
低轉速與高扭力農用馬達開發	農委會	2023
永磁馬達稀土磁石性能驗證	工研院材化所	2023
800V/100 kW 馬達驅動控制模擬分析	工研院電光所	2023
軍用商規微型無人機馬達、ESC國產自製研究開發	經緯航太	2023

1.蔡明祺；吳益彰；黃柏維；蔡名曉；詹謹聰；蔡沛屹；蕭子涵，2019，定速式磁性齒輪電機及含有其的馬達、發電機及電動載具，中華民國發明專利第I660562號。
 
2.蔡明祺；黃柏維，2017，磁阻馬達及其磁障結構，中華民國發明專利第I583103號。
 
3.蔡明祺；古力行；黃柏維，2016，軸向式磁性齒輪，中華民國發明專利第M519352號。
 
4.Ming-Chi Tsai and Po-Wei Huang, 2018, Reluctance Motor And Flux Barrier Structure Thereof. U.S. Patent No. 10135306B2.
 
5.蔡明祺；吳益彰；黃柏維；蔡名曉；詹謹聰；吳承安；蔡宏偉，2019，調速式磁性齒輪電機及含有其的馬達、發電機及電動載具，中華民國發明專利第I675530號。
 
6.蔡明祺；黃柏維; 張宗偉; 江翊華，2020，改良式鐵芯結構及導磁端蓋，中華民國發明專利第I692918號。
 
7.蔡明祺；吳昇澤; 黃柏維; 張宗偉; 石政欣; 江翊華，2021，電機構造及其定子鐵芯構件，中華民國發明專利第I716322號。
 
8.蔡明祺；謝旻甫; 施凱中; 黃柏維; 高子睿; 沈尚慧; 邱榮焜; 邱信宇，2022，馬達及其無鐵心定子定子線圈繞線組，中華民國發明專利第I769099號。
 
9.蔡明祺；黃孝賢; 江翊華; 黃柏維; 張宗偉; 石政欣，2022，磁性齒輪及其磁極構件，中華民國發明專利第I780639號。
 
10.蔡明祺；吳益彰;黃柏維; 蔡名曉; 黃詣，2022，電機構造及其定子殼件，中華民國發明專利第I782545號。
 
11.蔡明祺；張宗偉;黃柏維; 江翊華;石政欣，2023，充磁裝置，中華民國發明專利第I772157號。
12. Mi-Ching Tsai, Min-Fu Hsieh, Kai-Jung Shih, Po-Wei Huang, Lucio Jose Fernando Caceres Vera, Shang-Hui Shen, Jung-Kun Chiu, Hsin-Yu Chiu, 2023, Motor and coreless stator coil winding unit thereof, U.S. Patent No. 11,677,303.
13.陳冠銘；林省揚; 李泓毅; 黃柏維; 蔡明祺;謝旻甫，2023，捲繞治具及捲繞式電磁鐵芯，中華民國新型專利第M638725號。

黃柏維，蔡明祺，茆尚勳，“自起動式永磁同步馬達特性分析”，機械月刊，第405期，2009。

黃柏維，蔡明祺，“自起動式永磁同步馬達設計概述”，機械月刊，第431期，2011。

薛博文、鍾政英、陳政言、林維哲、黃柏維，“電動輔助自行車之動力輔助技術分析與驅動系統設計”，機械新刊/馬達與控制專題，2017年8月號

蔡明祺，林維哲，黃柏維，陳和安，高子睿，陳冠銘，謝旻甫，”電動車動力系統的發展與趨勢”，機械新刊/電動車專欄，2022年1月號