Skip to Content

Chen-Kuei Chung

Professor, Associate Head of Department
Name Chen-Kuei Chung
Office 91611
TEL 886-6-2757575 ext62111
FAX 886-6-2352973
E-Mail ckchung@mail.ncku.edu.tw
Laboratory
Education
  1. PhD, Materials Science and Engineering, National Tsing Hua University, Taiwan
Experience
  1. Professor, Mechanical Engineering, National Cheng Kung University (980801 - )
  2. Associate Professor, Mechanical Engineering, National Cheng Kung University (940801 - 980731)
  3. Assistant Professor,Mechanical Engineering, National Cheng Kung University (910801 - 940731)
  4. Manager, Industrial Technology Research Institute (831017 - 910731)
Expertise
  1. Technology of Microelectromechanical system
  2. Technology and integration of Micro-fabrication
  3. Fabrication and characterization of micro-nano materials
  4. Semiconductor engineering
  5. Inkjet technology
  6. Vacuum technology
  7. Materials analysis
Service
Honors
Patents
Publications

A. Journal paper

  1. C.K. Chung*;M.W. Liao;H.C. Chang;C.T. Lee,"Effects of temperature and voltage mode on nanoporous anodic aluminum oxide films by one-step anodization",Thin Solid Films;,(SCI & EI 2011)
  2. C.K. Chung*;T.S. Chen;N.W. Chang;M. W. Liao;C.T. Lee,"Effect of annealing temperature on the microstructure and photoluminescence of low resistivity Si/Si-N/Ta-N thin films using magnetron sputtering",Thin Solid Films;,(SCI & EI 2011)
  3. C.K. Chung*;S.L. Lin;S.Y. Cheng;K.P. Chuang;H.Y. Wang,"The effect of sol-gel composition ratio and laser power on phase transformation of crystalline titanium dioxide under CO2 laser annealing",Micro & Nano Letters;,(SCI & EI 2011)
  4. C.C. Peng*;C K Chung;J.F. Lin,"Effects of Al film thickness and annealing temperature on the aluminum-induced crystallization of amorphous silicon and carrier mobility",Acta Materialia;,(SCI & EI 2011)
  5. C.K. Chung*;T.Y. Chen;C.W. Lai,"Low-temperature formation of nanocrystalline SiC particles and composite from three-layer Si/C/Si film for the novel enhanced white photoluminescence",J Nanopart. Res.;,(SCI & EI 2011)
  6. C.K. Chung*;T.Y. Chen;C.W. Lai,"Microstructure-induced novel white photoluminescence from rapid-thermal-annealed two-layer Si/C on Si(100) with nanocomposite Si, SiC and C nanocrystals",Scripta Mater.;,(SCI & EI 2011)
  7. H.Y. Wang*;S.L. Lin;C.K. Chung;S. F. Chuang,"Experiment and simulation of resistance of nanoporous dentin biomaterial to CO2 laser irradiation",IET Nanobiotechnology;,(SCI & EI 2011)
  8. C.K. Chung*;W.T. Chang;M.W. Liao;H.C. Chang;C.T. Lee,"Fabrication of enhanced anodic alumina oxide performance at room temperatures using hybrid pulse anodization with effective cooling",Electrochimica Acta;,(SCI & EI 2011)
  9. C K Chung*;W.T. Chang;C.F. Chen;M.W. Liao,"Effect of temperature on the evolution of diffusivity, microstructure and hardness of nanocrystalline nickel films electrodeposited at low temperatures",Materials Letters;,(SCI & EI 2011)
  10. C.C. Peng*;C.K. Chung;B.H. Wu;M.H. Weng;C.C. Huang;J.F. Lin,"Effects of annealing conditions and thickness ratio of Si/Al films on the Hall carrier mobility, Al carrier concentration, and nanovoids formed in the metal-induced Si crystallization of Si/Al/Si/SiO2/glass specimens",Surface & Coatings Technology;,(SCI & EI 2011)
  11. C.K. Chung*;S.L. Lin,"On the fabrication of minimizing bulges and reducing the feature dimensions of microchannels using novel CO2 laser micromachining",J. Micromech. Microeng;,(SCI & EI 2011)
  12. C.K. Chung*;T.S. Chen;N.W. Chang,"Effect of reactive gases flow ratios on the microstructure and electrical resistivity of Ta-N-O thin films by reactive co-sputtering",Thin Solid Films;,(SCI & EI 2011)
  13. C.K. Chung*;W.T. Chang;M.W. Liao;H.C. Chang,"Effect of pulse voltage and aluminum purity on the characteristics of anodic aluminum oxide using hybrid pulse anodization at room temperature",Thin Solid Films;,(SCI & EI 2011)
  14. C.K. Chung*;T.R. Shih;C.K. Chang;C.W. Lai;B. H. Wu,"Design and experiments of a short-mixing-length baffled microreactor and its application to microfluidic synthesis of nanoparticles",Chemical Engineering J.;,(SCI & EI 2011)
  15. C K Chung*;W.T. Chang;M.W. Liao,"On work function and characteristics of anomalous electrodeposited nickel-cobalt films",Thin Solid Films;,(SCI & EI 2011)
  16. C.K. Chung;T.Y. Chen;C.W. Lai,"J Nanopart. Res.",Low-temperature formation of nanocrystalline SiC particles and composite from three-layer Si/C/Si film for the novel enhanced white photoluminescence;,(SCI 2010)
  17. C.K. Chung;T.Y. Chen;C.W. Lai,"Scripta Mater.",Microstructure-induced novel white photoluminescence from rapid-thermal-annealed two-layer Si/C on Si(100) with nanocomposite Si, SiC and C nanocrystals;,(SCI 2010)
  18. C.C. Peng;C K Chung;J.F. Lin,"Acta Materialia",Effects of Al film thickness and annealing temperature on the aluminum-induced crystallization of amorphous silicon and carrier mobility;,(SCI 2010)
  19. C.K. Chung;W.T. Chang;M.W. Liao;H.C. Chang;C.T. Lee,"Electrochimica Acta",Fabrication of enhanced anodic alumina oxide performance at room temperatures using hybrid pulse anodization with effective cooling;,(SCI 2010)
  20. C. K. Chung;T. S. Chen,"Microelectronics Engineering",Effect of Si/Ta and Nitrogen Ratios on the thermal stability of Ta-Si-N Thin Films;,(SCI 2010)
  21. C.K. Chung;S.L. Lin,"J. Micromech. Microeng.",On the fabrication of minimizing bulges and reducing the feature dimensions of microchannels using novel CO2 laser micromachining;,(SCI 2010)
  22. C.K. Chung;T.S. Chen;N.W. Chang,"Thin Solid Films",Effect of reactive gases flow ratios on the microstructure and electrical resistivity of Ta-N-O thin films by reactive co-sputtering;,(SCI 2010)
  23. C.K. Chung;W.T. Chang;M.W. Liao;H.C. Chang,"Thin Solid Films",Effect of pulse voltage and aluminum purity on the characteristics of anodic aluminum oxide using hybrid pulse anodization at room temperature;,(SCI 2010)
  24. C.K. Chung;T.R. Shih;C.K. Chang;C.W. Lai;B. H. Wu,"Chemical Engineering J.",Design and experiments of a short-mixing-length baffled microreactor and its application to microfluidic synthesis of nanoparticles;,(SCI 2010)
  25. C K Chung;W.T. Chang;M.W. Liao,"Thin Solid Films",On work function and characteristics of anomalous electrodeposited nickel-cobalt films;,(SCI 2010)
  26. C K Chung;W.T. Chang;C.F. Chen;M.W. Liao,"Materials Letters",Effect of temperature on the evolution of diffusivity, microstructure and hardness of nanocrystalline nickel films electrodeposited at low temperatures;,(SCI 2010)
  27. C. K. Chung;S. L. Lin,"Int. J. Mach. Tools Manuf.",CO2 laser micromachined crackless through holes of Pyrex 7740 glass;,(SCI 2010)
  28. C.K. Chung;T.S. Chen;N.W. Chang;S.C. Chang;M.W. Liao,"Surf. Coat. Technol.",Oxidation resistance and mechanical property of cosputtered quasi-amorphous Ta-Si-N films under vacuum rapid thermal annealing;,(SCI 2010)
  29. C.C. Peng;C K Chung;J.F. Lin,"J. of the Electrochemical Society",Effects of a native oxide layer on the carrier mobility and void formation at aluminum-induced crystallization of amorphous silicon;,(SCI 2010)
  30. C.C. Peng;C K Chung;J.F. Lin,"Thin Solid Films",Formation of microcrystalline silicon films using rapid crystal aluminum induced crystallization under low-temperature rapid thermal annealing;,(SCI 2010)
  31. C.K. Chung;A. Nautiyal;T.S. Chen,"J. Phys. D: Appl. Phys.",Low-temperature resistivity and microstructure of reactive magnetron co-sputtered Ta–Si–N thin films;,(SCI 2010)
  32. C.K. Chung;K.L. Sher;Y.J. Syu;C.C. Cheng,"Microsystem Technologies",Fabrication of Cone-like Microstructure Using UV LIGA-like for Light Guide Plate Application;,(SCI 2010)
  33. C.K. Chung;T.Y. Liu;W.T. Chang,"Microsystem Technologies",Effect of oxalic acid concentration on the formation of anodic aluminum oxide using pulse anodization at room temperature;,(SCI 2010)
  34. C.K. Chung;T. R. Shih;B. H. Wu;C.K. Chang,"Microsystem Technologies",Design and Mixing Efficiency in Double-Zigzag Micromixer with Flat Angle;,(SCI 2010)
  35. C.K. Chung;W.T. Chang;S.T. Hung,"Microsystem Technologies",lectroplating of Nickel Film at Ultra Low Electrolyte Temperature;,(SCI 2010)
  36. C.K. Chung;M.W. Liao;S.L. Lin,"Appl. Phys. A",Effect of Nonionic Surfactant Addition on Pyrex Glass Ablation Using Water-Assisted CO2 Laser Processing;,(SCI 2010)
  37. C.K. Chung;B.H. Wu,"J. Nanoscience and Nanotechnology",Effect of substrate temperature on the in-situ formation of crystalline SiC nanostructured film using ultra-high-vacuum ion beam sputtering;,(SCI 2010)
  38. C.K. Chung;H.C. Chang;T.R. Shih;S.L. Lin;E.J. Hsiao;Y.S. Chen;A. C. Chang;C.C. Chen;C.C. Lin,"Biomedical Microdevies",Water-assisted CO2 laser ablated glass and modified thermal bonding for capillary-driven bio-fluidic application;,(SCI 2010)
  39. C.K. Chung*,"Effects of oxygen flow ratios and annealing temperatures on Raman and photoluminescence of titanium oxide thin films deposited by reactive magnetron sputtering",Thin Solid Films;,(SCI 2009)
  40. C.K. Chung*,"Effect of Si/Ta and Nitrogen Ratios on the thermal stability of Ta-Si-N Thin Films",Microelectronics Engineering;,(SCI 2009)
  41. C.K. Chung*,"Characterization and patterning of novel high TCR Ta-Si-N thin films for sensor application",Sensors and Actuators-A;,(SCI 2009)
  42. C.K. Chung*;H.C. Chang,"Water-assisted CO2 laser ablated glass and modified thermal bonding for capillary-driven bio-fluidic application",Biomedical Microdevies;,(SCI 2009)
  43. C.K. Chung*,"Effect of substrate temperature on the in-situ formation of crystalline SiC nanostructured film using ultra-high-vacuum ion beam sputtering",J. of Nanoscience and Nanotechnology;,(SCI 2009)
  44. C.K. Chung*,"Effect of Nonionic Surfactant Addition on Pyrex Glass Ablation Using Water-Assisted CO2 Laser Processing",Appl. Phys. A;,(SCI 2009)
  45. C.K. Chung*,"Microsystem Technologies",Electroplating of Nickel Film at Ultra Low Electrolyte Temperature;,(SCI 2009)
  46. C.K. Chung*,"Design and Mixing Efficiency in Double-Zigzag Micromixer with Flat Angle",Microsystem Technologies;,(SCI 2009)
  47. C.K. Chung*,"Crackless linear through-wafer etching of Pyrex glass using liquid-assisted CO2 laser processing",Appl. Phys. A;,(SCI 2009)
  48. C.K. Chung*,"A New Visible Photoluminescence in the Conducting Ta-Si-N Nanocomposite Thin Films",J. of Luminescence;,(SCI 2009)
  49. C.K. Chung*,"Effect of Nitrogen Flow Ratios on the Microstructure and Properties of Ta-Al-N Thin Films by Reactive Co-sputtering",J. of the Electrochemical Society;,(SCI 2009)
  50. C.K. Chung*,"Fabrication and flow test of long-term hydrophilic fluidic chip without using any surface modification treatment",Microfluidics & Nanofluidics;,(SCI 2009)
  51. C.K. Chung*,"Hybrid pulse anodization for the fabrication of porous anodic alumina films from commercial purity (99%) aluminum at room temperature",Nanotechnology;,(SCI 2009)
  52. C.K. Chung*,"Thickness Effect on the Formation of SiC Nanoparticles in Sandwiched Si/C/Si and C/Si Multilayers",Thin Solid Films;,(SCI 2009)
  53. C.K. Chung*,"Effect of pulse frequency and current density on anomalous composition and nanomechanical properties of co-electrodeposited Ni-Co films",Thin Solid Films;,(SCI 2009)
  54. C.K. Chung*,"Deep nickel metal deposition on multiscale feature sizes of a small hole and large sector cavities using electroforming",J. Micro/Nanolithography MEMS and MOEMS;,(SCI 2009)
  55. C.K. Chung*,"Effect of Amorphous Si Layer on the Reaction of Carbon and Silicon in the C/Si Multilayer during Vacuum Annealing",Thin Solid Films;,(SCI 2009)
  56. C.K. Chung*,"Effect of Underlying Silicon Film on the Evolution of Microstructure and Hardness of the High-temperature Annealed Carbon Film on Si Substrate",Materials Letters;,(SCI 2009)
  57. C.K. Chung*,"Effect of oxalic acid concentration on the formation of anodic aluminum oxide using pulse anodization at room temperature",Microsystem Technologies;,(SCI 2009)
  58. B.H. Wu*;C.K. Chung,"Effect of residual stress on nanoindented property of Si/C/Si multilayers",J. Micro/Nanolithography MEMS and MOEMS;,(SCI 2009)
  59. C.K. Chung*,"Effect of microstructure on the mechanical properties of carbon nanofilms deposited on the Si(100) at high temperature under ultra high vacuum",Surface & Coatings Technology;,(SCI 2009)
  60. C.K. Chung*,"Effect of the Target Shuttering on the Characteristics of the Ta-Si-N Thin Films by Reactive Magnetron Co-sputtering",Surface & Coatings Technology;,(SCI 2009)
  61. C.K. Chung*,"Effect of the Co content on the work function of the electroplated Ni-Co films",Microsystem Technologies;,(SCI 2008)
  62. C.K. Chung*,"The anomalous behavior and properties of Ni-Co films codeposited in the sulfamate-chloride solution",Microsystem Technologies;,(SCI 2008)
  63. C.K. Chung*,"Biomedical Microdevies",Mixing behavior of the rhombic micromixers over a wide Reynolds number range using Taguchi method and 3D numerical simulations;,(SCI 2008)
  64. C.K. Chung*,"Grain boundary scattering for temperature coefficient of resistance (TCR) behavior of Ta-Si-N thin films",J. Phys. D;,(SCI 2008)
  65. C.K. Chung*,"Effect of baffle height and Reynolds number on fluid mixing",Microsystem Technologies;,(SCI 2008)
  66. C.F. Han;B.H. Wu;J.F. Lin*;C.K. Chung,"Theoretical modeling developed to evaluate the hardness and reduced modulus for the C/a-Si composite film using nanoindentation tests",Nanotechnology;,(SCI 2008)
  67. C.K. Chung*,"Microfluid Nanofluid",Effect of Geometry on Fluid Mixing of the Rhombic Micromixers;,(SCI 2008)
  68. C.K. Chung*,"Raman Inspection for the Annealing Induced Evolution of sp2 and sp3 Bonding Behavior in Sandwiched Si/C/Si Multilayer",Thin Solid Films;,(SCI 2008)
  69. T.R. Shih;C.K. Chung*,"A high-efficiency planar micromixer with convection and diffusion mixing over a wide Reynolds number range",Microfluid Nanofluid;,(SCI 2008)
  70. C.K. Chung*,"Formation of SiC Nanoparticles of Two-layer C/Si Films on the Si Substrate Using Thermal Annealing",Thin Solid Films;,(SCI 2008)
  71. C.K. Chung*,"Effect of nitrogen flow ratio on the microstructure evolution and nanoindented mechanical property of the Ta-Si-N Thin Films",J. Mater. Res.;,(SCI 2008)
  72. C.K. Chung*,"Surface modification of SU8 photoresist for the shrinkage improvement in the monolithic MEMS microstructure",J. Micromech. Microeng;,(SCI 2007)
  73. 鍾震桂*;吳博雄;林仁輝,"超高真空離子束沈積碳矽多層奈米複合薄膜藉由熱退火機制成長碳化矽奈米顆粒之研究",; 中工高雄會刊,(中華民國期刊論文2007)
  74. C.K. Chung*,"Fabrication and analysis the reflowed microlens arrays using JSR THB-130N photoresist",Microsystem Technologies;,(SCI 2007)
  75. C.K. Chung*,"Effect of seed layer stress on the fabrication of monolithic MEMS microstructure",Microsystem Technologies;,(SCI 2007)
  76. 吳博雄*;黃朝鈺;謝吉祥;林仁輝;鍾震桂,"超高真空離子束濺鍍系統",; 中工高雄會刊,(中華民國期刊論文2007)
  77. C.K. Chung*,"Thickness Effect on the Formation of SiC Nanoparticles in Sandwiched Si/C/Si and C/Si Multilayers",Thin Solid Films;,(SCI 2007)
  78. C.K. Chung*,"Rhombic micromixer with asymmetrical flow for enhancing mixing",J. Micromech. Microeng;,(SCI 2007)
  79. C.K. Chung*,"Residual Stress and Hardness Behaviors of the Two-layer C/Si Films",Surface & Coatings Technology;,(SCI 2007)
  80. C.K. Chung*,"Effect of Microstructures on the Electrical and Optoelectronic Properties of Nanocrystalline Ta-Si-N Thin Films by Reactive Magnetron Cosputtering",Scripta Mater.;,(SCI 2007)
  81. C.K. Chung*,"A hybrid CO2 laser processing for silicon etching",Optics Express;,(SCI 2007)
  82. C.P. Liu;D.H. Chen;J.J. Wu;J.C. Huang;C.K. Chung,"A Multidisciplinary Introductory Nanotechnology Course with Hands-on Experiments",Journal of Materials Education;,(other 2007)
  83. J-J Junz Wang*;C.K. Chung,"Fabrication of Wedge-Shape Tool via Electrochemical Micromachining with Diamond-like Carbon Coating",Journal of Materials Processing Technology;,(SCI 2007)
  84. C.K. Chung*,"Effect of pulse frequency on the morphology and nanoindentation property of electroformed Ni films",Microsystem Technologies;,(SCI 2007)
  85. C.K. Chung*,"Fabrication of the monolithic polymer-metal microstructure by the backside exposure and electroforming technology",Microsystem Technologies;,(SCI 2007)
  86. 鍾震桂*,"積體化微結構製備技術之研究(2/2)",; 國科會工程科技通訊,(中華民國期刊論文2006)
  87. P. J. Su;C.K. Chung*,"Amorphization of Ta-Al Films Using Magnetron Sputtering",Surface & Coatings Technology;,(SCI 2006)
  88. C.K. Chung*,"Global and local residual stress in silicon carbide films produced by plasma-enhanced chemical vapor deposition",Surface & Coatings Technology;,(SCI 2006)
  89. C.K. Chung*,"IEEE Review on Advances in Micro, Nano and Molecular Systems",Silicon Micromachining by CO2 Laser;,(EI 2006)
  90. C.K. Chung*,"Growth of SiC Nanoparticles in C/Si Multilayers using Annealing",IEEE Review on Advances in Micro, Nano and Molecular Systems;,(EI 2006)
  91. C.K. Chung*,"Design and Simulation of a Novel Micro-mixer with Baffles and Side-wall Injection into the Main Channel",IEEE Review on Advances in Micro, Nano and Molecular Systems;,(EI 2006)
  92. C.K. Chung*,"Annealing Effects on Microstructure and Properties of Ta-Al Thin Film Resistors",Surface & Coatings Technology;,(SCI 2006)
  93. C.K. Chung*,"Thermal Stability of Ta-Si-N Nanocomposite Thin Films at Different Nitrogen Flow Ratio",Surface & Coatings Technology;,(SCI 2006)
  94. C.K. Chung*,"Thermal Induced Formation of SiC Nanoparticles from Si/C/Si Multilayers Deposited by Ultra-high-vacuum Ion Beam Sputtering",Nanotechnology;,(SCI 2006)
  95. C.K. Chung*,"A Novel Fabrication of Ionic Polymer-Metal Composites (IPMC) Actuator with Silver Nano-Powders",Sensors and Actuators;,(SCI 2006)
  96. C.K. Chung*,"Fabrication and characterization of amorphous Si films by PECVD for MEMS",J. Micromech. Microeng;,(SCI 2005)
  97. C.K. Chung*,"Bulge formation and improvement of the polymer in CO2 laser micromachining",J. Micromech. Microeng;,(SCI 2005)
  98. C.K. Chung*,"Simulation and Fabrication for the Pin-to-Plate Microjoining by Nd:YAG Laser",Microsystem Technologies;,(SCI 2005)
  99. C.K. Chung*,"Geometrical pattern effect on silicon deep etching by an inductively coupled plasma system",J. Micromech. Microeng.;,(SCI 2004)
  100. C.K. Chung*,"Material Characterization and Nanohardness Measurement of Nanostructured Ta-Si-N Film",Surface Coatings and Technology;,(SCI 2004)
  101. C.K. Chung,"Flow Simulation and Visualization of a Micro Droplet Generator",Journal of Flow Visualization and Image Processing;,(EI 2004)
  102. 鍾震桂*,"幾何形狀對矽感應耦合電漿蝕刻的影響",; 真空科技,(中華民國期刊論文2004)
  103. C.K. Chung*,"Selection of Mold Materials for Electroforming of Monolithic Two-layer Microstructure",Microsystem Technologies;,(SCI 2004)
  104. C.K. Chung*,"Modelling and fabrication of step height control of multilevel Si(100) structure in KOH solution",J. Micromech. Microeng.;,(SCI 2004)
  105. C.K. Chung*,"Combination of Thick Resist and Electroforming Technologies for Monolithic Inkjet Application",Microsystem Technologies;,(SCI 2004)
  106. 謝慶堂*;丁志明;楊志輝;鍾震桂,"微機電封裝技術之簡介",; 工業材料雜誌,(中華民國期刊論文2003)
  107. C.K. Chung*,"Method for Reducing Reactive Ion Etching Lag in MEMS Process",Int. J. Nonlinear Sci.;,(SCI 2002)
  108. C.K. Chung*,"Annealing Effect on the Adhesion of Stacked Films for MEMS",Int. J. Nonlinear Sci.;,(SCI 2002)
  109. C.K. Chung*,"Pneumatically Bidirectional Microfluidic Regulation Using Venturi Pumps by Deep RIE and Bonding Technology",Microsystem Technologies;,(SCI 2002)
  110. C.K. Chung*,"Micromachined Multilevel Silicon Structure by Anisotropic Wet Etching",Int. J. Nonlinear Sci;,(SCI 2002)
  111. C.K. Chung*,"Fabrication of Thin Film Vanadium Oxide for Microbolometer",Int. J. Nonlinear Sci.;,(SCI 2002)

B. Conference paper

  1. S.L. Lin;S.Y. Cheng;K.P. Chuang;H.Y. Wang;C.K. Chung,"The effect of solution quantity for titanium dioxide phase transformation by CO2 laser annealing technique",IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE-NEMS2011), February 20-23 Kaohsiung, Taiwan;,( 2011)
  2. C.K. Chang;C.C. Lai;C.K. Chung,"Numerical analysis and experiments of capillarity-driven micro-fluid chip",IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE-NEMS2011), February 20-23 Kaohsiung, Taiwan;,( 2011)
  3. C.K. Chang;T.R. Shih;C.K. Chung,"Design and fabrication of an advanced rhombic micro-mixer with branch channels",IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE-NEMS2011), February 20-23 Kaohsiung, Taiwan;,( 2011)
  4. S.L. Lin;H.Y. Wang;C.K. Chung;S. F. Chuang,"Experiment and Simulation of Resistance of Nanoporous Dentin Biomaterial to CO2 Laser Irradiation",IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE-NEMS2011), February 20-23 Kaohsiung, Taiwan;,( 2011)
  5. C.K. Chung;W.T. Chang,"Effect of pulse voltage and aluminum purity on the characteristics of anodic aluminum oxide using hybrid pulse anodization at room temperature",Thin Films 2010, Harbin, China;,( 2010)
  6. C.K. Chung;T.S. Chen;N.W. Cheng;S.C. Chang;M.W. Liao,"Oxidation resistance and mechanical properties of quasi-amorphous Ta-Si-N sputtered films",ICMCTF 2010, San Diego, USA;,( 2010)
  7. C.K. Chung;T.Y. Chen;C.W. Lai;C.C. Peng;B.H. Wu,"High Density of SiC Nanoparticle Formation from Three-Layer Si/C/Si on Si (100) Using Rapid Thermal Annealing",ICMCTF 2010, San Diego, USA;,( 2010)
  8. C.K. Chung;T.S. Chen;N.W. Chang,"Effect of reactive gases flow ratios on the microstructure and electrical resistivity of Ta-N-O thin films by reactive co-sputtering",Thin Films 2010, Harbin, China;,( 2010)
  9. C.K. Chung;N.W Chang;T.S Chen;S.C Chang;B.H Wu,"Effect of Substrate Bias and Nitrogen Flow Rate on the Microstructure and Properties of TaNx Thin Films",ICMCTF 2010, San Diego, USA;,( 2010)
  10. W.T. Chang;C.K. Chung,"Nano-mechanical Behavior of Low Temperature Electroplated Nano-crystalline Ni Films",IEEE NEMS 2010;,( 2010)
  11. C.K. Chung;S.C. Chang;J.J. Jhu;T.S. Chen;B.H. Wu,"Texture Effect on the Hardness Enhancement of nanocomposite Ti-Si-N Thin Films Using Reactive Magnetron Co-sputtering",ICMCTF 2010, San Diego, USA;,( 2010)
  12. C.K. Chung;T.Y. Chen;C.W. Lai;B.H. Wu,"High density of SiC nanoparticle formation from three-layer Si/C/Si on Si (100) using rapid thermal annealing",ICMCTF 2010, San Diego, USA;,( 2010)
  13. C.K. Chung;C.W. Lai,"Broad visible photoluminescence from two-layer Si/C film deposited on Si (100) substrate under rapid thermal annealing",ICMCTF 2010, San Diego, USA;,( 2010)
  14. C.K. Chung;E.C. Chang;B.H. Zou,"Formation and observation of thermal bubble from multilayer heating material",IEEE NEMS 2010, Xiamen, China;,( 2010)
  15. C.K. Chung;S.L. Lin;K.C. Chang;H.Y. Wang,"Fabrication and Simulation of PDMS Assisted CO2 Laser Ablation",IEEE NEMS 2010, Xiamen, China;,( 2010)
  16. C.K. Chung;J.J. Jhu;S.C. Chang,"Evolution of Mechanical Property of Nanocomposite TiSiN Films Using Reactive Magnetron Cosputtering",IEEE NEMS 2010, Xiamen, China;,( 2010)
  17. C.K. Chung;T. Y. Liu;W. T. Chang,"Application of Pulse Voltage for Enhancing Uniform Nano-structured Anodic Aluminum Oxide",IEEE NEMS 2010, Xiamen, China;,( 2010)
  18. S.L. Lin;H.Y. Wang;C.K. Chung,"Fabrication and Simulation of Pyrex Glass Drilling Using CO2 Laser",IEEE NEMS 2010, Xiamen, China;,( 2010)
  19. 鍾震桂*,"UV類LIGA製程技術應用於導光板製造",中國機械工程學會第二十六屆研討會;,( 2009)
  20. C. K. Chung*,"新型電極材",中國機械工程學會第二十六屆研討會;,( 2009)
  21. C. K. Chung*,"溶劑含量對雷射改質二氧化鈦相變化的影響",中國機械工程學會第二十六屆研討會;,( 2009)
  22. C.K. Chung*,"Fabrication of Cone-like Microstructure Using UV LIGA-like for Light Guide Plate Application",HARMST2009;,( 2009)
  23. C.K. Chung*,"Design and Mixing Efficiency in Double-Zigzag Micromixer with Flat Angle",HARMST2009;,( 2009)
  24. C.K. Chung*,"Electroplating of Nickel Film at Ultra Low Electrolyte Temperature",HARMST2009;,( 2009)
  25. C.K. Chung*,"Effect of oxalic acid concentration on the formation of anodic aluminum oxide using pulse anodization at room temperature",HARMST2009;,( 2009)
  26. C.K. Chung*,"Design of a Novel Microreactor for Microfluidic Synthesis of Silica Nanoparticles",Transducers 2009;,( 2009)
  27. C.K. Chung*,"Comparison of Methods for Sensing Contact Potential Difference of Nanocrystalline Alloy Films Using a Kelvin Actuating Capacitor",IEEE-NEMS2009;,( 2009)
  28. C.K. Chung*,"Fabrication of a Novel Micro Liquid Flow Sensor Using a TaN Thin Film",IEEE-NEMS2009;,( 2009)
  29. C.K. Chung*,"Effect of Nitrogen Flow Ratios on Microstructure and Mechanical Properties of Nanocomposite Ti-Si-N Thin Flims",IEEE-NEMS2009;,( 2009)
  30. C.K. Chung*,"Influence of Substrate Bias on the Resistivity and TCR of Nanostructured Ta-Si-N Films",IEEE-NEMS2009;,( 2009)
  31. 鍾震桂*,"無閥壓電微幫浦的雷射加工製程",中國機械工程學會第二十六屆研討會;,( 2009)
  32. C.K. Chung*,"Characteristics of Truncate-angle Rhombic Micromixer and Rapid Mold Fabrication Using CO2 Laser Micromachining",IEEE-NEMS2009;,( 2009)
  33. C. K. Chung*,"Determination of WorkFunction in Ni-Co Alloy Films by Ultraviolet Photoemission Spectroscopy andKelvin Probe",SNDT2009;,( 2009)
  34. C.K. Chung*,"Simulation of the Novel Micro-valve Using Dynamic Analysis",IEEE-NEMS2009;,( 2009)
  35. C.K. Chung*,"Effect of Ti power on microstructure and mechanical properties of TiSiN thiin films",ISNST2009;,( 2009)
  36. C. K. Chung*,"二氧化碳雷射加工改善與有限元素模擬分析之研究",中國機械工程學會第二十六屆研討會;,( 2009)
  37. C.K. Chung*,"Annealing Effect on the Microstructure and Morphology of the Nanostructured Ta-Si-N Thin Films",3rd IEEE-NEMS2008;,( 2008)
  38. C.K. Chung*,"Rapid Thermal Annealing Enhanced Crystalline SiC Particles at Lower Formation Temperature",3rd IEEE-NEMS2008;,( 2008)
  39. C.K. Chung*,"Raman Inspection for the Annealing Induced Evolution of sp2 and sp3 Bonding Behavior in Sandwiched Si/C/Si Multilayer",ICMCTF 2008;,( 2008)
  40. C.K. Chung*,"Formation of SiC Nanoparticles of Two-layer C/Si Films on the Si Substrate Using Thermal Annealing",ICMCTF 2008;,( 2008)
  41. C.K. Chung*,"Effect of Si/Ta and Nitrogen Ratios on the Thermal Stability of Ta-Si-N Thin Films by Magnetron Reactive Cosputtering",ICMCTF 2008;,( 2008)
  42. C.K. Chung*,"Grain Boundary Scattering for Temperature Coefficient of Resistance (TCR) Behavior of Ta-Si-N Thin Films",ICMCTF 2008;,( 2008)
  43. C.K. Chung*,"CO2 Laser Micromachined Crackless Through Holes of Pyrex Glass",APCOT 2008;,( 2008)
  44. C.K. Chung*,"Nunerical Simulation and Fabrication of Proximity Exposure for Slant Resist Profile",APCOT 2008;,( 2008)
  45. C.K. Chung*,"Deep Metal Deposition on Multiscale Feature Sizes of a Small Hole and Large Sector Cavities Using Electroforming",APCOT 2008;,( 2008)
  46. C.K. Chung*,"Characterization of Novel High Tcr Ta-Si-N Thin Films for Sensor Application",APCOT 2008,;,( 2008)
  47. C.K. Chung*,"Microstructure and Nanomechanical Behavior of Diamond-Like Carbon Films at High Temperature Annealing",APCOT 2008;,( 2008)
  48. C.K. Chung*,"Effect of Residual Stress on Nanoindented Property of Si/C/Si Multilayers",APCOT 2008;,( 2008)
  49. C.K. Chung*,"Sensing and Determination of Contact Potential Difference between Two Metals Using an Actuating Capacitor",3rd IEEE-NEMS2008;,( 2008)
  50. C.K. Chung*,"Effect of pulse frequency and current density on anomalous composition and nanomechanical properties of co-electrodeposited Ni-Co films",ThinFilms 2008;,( 2008)
  51. C. K. Chung*,"CO2 Laser for the Rapid Fabrication of Micro Kelvin Probe",SNDT2008;,( 2008)
  52. C.K. Chung*,"Effect of substrate temperature on the in-situ formation of crystalline SiC nanostructured film using ultra-high-vacuum ion beam sputtering",ThinFilms 2008;,( 2008)
  53. C.K. Chung*,"A study on the nanoindentation of carbon nanofilm on the heated single crystalline Si substrate at high temperature",International Symposium on Nano Science and Technology;,( 2008)
  54. C.K. Chung*,"The microstructure and mechanical properties of altering shuttering tantalum silicon nitride (Ta-Si-N) nanocomposite films by magnetron reactive co-sputter",International Symposium on Nano Science and Technology;,( 2008)
  55. C.K. Chung*,"Mechanical and electrical characteristics of reactively sputtered Ta-N",International Symposium on Nano Science and Technology;,( 2008)
  56. C.K. Chung*,"Mixing Process of Obstacles Micromixer with Low Pressure Drop",3rd IEEE-NEMS2008;,( 2008)
  57. C.K. Chung*,"Reaction of Carbon and Silicon at High Temperature Deposition",3rd IEEE-NEMS2008;,( 2008)
  58. C.K. Chung*,"Design of A Self-Stirring Micromixer at Low Reynolds Number Flow",3rd IEEE-NEMS2008;,( 2008)
  59. 鍾震桂*,"反應式共濺鍍鈦-矽-氮薄膜之微結構與機械性質研究",中國機械工程學會第二十五屆研討會;,( 2008)
  60. 鍾震桂*,"奈米壓痕法探討單層鈦奈米薄膜機械性質",中國機械工程學會第二十五屆研討會;,( 2008)
  61. 鍾震桂*,"覆蓋層對Pyrex玻璃的雷射加工研究",中國機械工程學會第二十五屆研討會;,( 2008)
  62. 鍾震桂*,"水輔助CO2雷射在Soda lime玻璃之切割",中國機械工程學會第二十五屆研討會;,( 2008)
  63. 鍾震桂*,"功函數變異於凱文探針/紫外光光譜儀之研究",中國機械工程學會第二十五屆研討會;,( 2008)
  64. C.K. Chung*,"Etching Behavior of Silicon Using CO2 Laser",2nd IEEE-NEMS2007;,( 2007)
  65. C.K. Chung*,"Design and Simulation of a Rhombic Micromixer for Rapid Mixing",2nd IEEE-NEMS2007;,( 2007)
  66. C.K. Chung*,"The anomalous behavior and properties of Ni-Co films codeposited in the sulfamate-chloride solution",HARMST2007;,( 2007)
  67. C.K. Chung*,"Effect of the Co content on the work function of the electroplated Ni-Co films",HARMST2007;,( 2007)
  68. C.K. Chung*,"Effect of baffle height and Reynolds number on fluid mixing",HARMST2007;,( 2007)
  69. C.K. Chung*,"Effect of Microstructures on Electrical and Photoluminescent Properties of Nanocrystalline Ta-Si-N Thin Films by Magnetron Reactive Co-Sputtering",ICMCTF 2007;,( 2007)
  70. C.K. Chung*,"Thickness Effect on the Formation of SiC Nanoparticles in Sandwiched Si/C/Si and C/Si Multilayers",ICMCTF 2007;,( 2007)
  71. C.K. Chung*,"Residual Stress and Hardness Behaviors of the Two-layer C/Si Films",ICMCTF 2007;,( 2007)
  72. C.K. Chung*,"Fabrication of Light Guide Plate Using Backside Exposure Lithography",IDMC07;,( 2007)
  73. C.K. Chung*,"Effect of Amorphous Si Thickness on the Formation of SiC Nanoparticles during High Vacuum Annealing",2nd IEEE-NEMS2007;,( 2007)
  74. C.K. Chung*,"Fabrication and characterization of nanostructured Ta-Si-N Films",2nd IEEE-NEMS2007;,( 2007)
  75. 鍾震桂*,"凱文探針",能源與光電鍍膜科技研討會;,( 2007)
  76. C. K. Chung*,"SIMULATION OF PROXIMITY EXPOSURE FOR SLANT RESIST PROFILE",2007台灣光電科技研討會;,( 2007)
  77. 鍾震桂*,"PYREX玻璃基板的",2007台灣光電科技研討會OPT2007;,( 2007)
  78. 鍾震桂*,"介面活性劑對於水輔助",2007台灣光電科技研討會;,( 2007)
  79. 鍾震桂*,"背後曝光技術應用在導光板微結構之製作",2007台灣光電科技研討會;,( 2007)
  80. C. K. Chung*,"奈米複合薄膜Ta-Si-N的微結構、機械性質與熱穩定性",第十一屆奈米工程暨微系統技術研討會;,( 2007)
  81. C. K. Chung*,"共濺鍍沈積氮化鉭矽薄膜應用於溫度感應器之研究",第十一屆奈米工程暨微系統技術研討會;,( 2007)
  82. C. K. Chung*,"Fluid Mixing in the Cross shape Microchannel with Obstructions",第十一屆奈米工程暨微系統技術研討會;,( 2007)
  83. C. K. Chung*,"以氧電漿表面改質技術運用在高分子多層膜堆疊製作",第十一屆奈米工程暨微系統技術研討會;,( 2007)
  84. C. K. Chung*,"Sensing Mechanism and Signal Analysis of Contact Potential Difference Measurement using Actuating Capacitor",SNDT2007;,( 2007)
  85. C. K. Chung*,"Baffle effect of a micromixer with sidewall injection on the mixing efficiency",SNDT2007;,( 2007)
  86. 鍾震桂*,中國機械工程學會第二十三屆研討會;,( 2006)
  87. 鍾震桂*,"接觸電位差之",中國機械工程學會第二十三屆研討會;,( 2006)
  88. 鍾震桂*,"以水輔助",中國機械工程學會第二十三屆研討會;,( 2006)
  89. 鍾震桂*,"液晶高分子之微熱壓印成型研究",中國機械工程學會第二十三屆研討會;,( 2006)
  90. 鍾震桂*,"快速混合之微流元件設計與製作",中國機械工程學會第二十三屆研討會;,( 2006)
  91. 鍾震桂*,"導電SU8厚光阻的製程技術",第四屆精密機械與製造技術研討會;,( 2006)
  92. C.K. Chung*,"Residual stress and nano-hardness behavior of the two layer c/si nanocomposites",IEDM2006;,( 2006)
  93. 鍾震桂*,"矽加入對氮化鉭薄膜之微結構與機械性質的影響",中國機械工程學會第二十三屆研討會;,( 2006)
  94. C.K. Chung*,"Residual stress and nano-hardness behavior of the two layer c/si nanocomposites",IEDM2006;,( 2006)
  95. C.K. Chung*,"Design and Simulation of a Novel Micro-mixer with Baffles and Side-wall Injection into the Main Channel",IEEE International Conference of Nano/Micro Engineered and Molecular Systems (1st IEEE-NEMS2006);,( 2006)
  96. J.J. Wang*;C.K. Chung,"Fabrication of wedge-shape tool via electrochemical micromachining with diamond-like carbon coating",AFDM 2006;,( 2006)
  97. C.K. Chung*,"Nanoindentation on the C and C/Si Nanocomposites by the Continuous Stiffness Measurement Technique",ICMCTF 2006;,( 2006)
  98. C.K. Chung*,"Annealing Effect on the Microstructure and Property of Ta-Al Thin Film Resistor",ICMCTF 2006;,( 2006)
  99. C.K. Chung*,"Microstructure and Properties of Novel TaAlN Thin Films by Magnetron Reactive Co-Sputtering",ICMCTF 2006;,( 2006)
  100. C.K. Chung*,"Influence of Nitrogen Flow Ratio on the Microstructure and Nanomechanical properties of Ta-Si-N Thin Films by Magnetron Reactive Co-Sputtering",ICMCTF 2006;,( 2006)
  101. C.K. Chung*,"Thermal Stability of Ta-Si-N Nanocomposite Thin Films at Different Nitrogen Flow Ratio",ICMCTF 2006;,( 2006)
  102. C.K. Chung*,"Silicon Micromachining by CO2 Laser",IEEE International Conference of Nano/Micro Engineered and Molecular Systems (1st IEEE-NEMS2006);,( 2006)
  103. C.K. Chung*,"Growth of SiC Nanoparticles in C/Si Multilayers using Annealing",IEEE International Conference of Nano/Micro Engineered and Molecular Systems (1st IEEE-NEMS2006);,( 2006)
  104. 鍾震桂*,"奈米壓痕法探討單雙層C/Si奈米複合薄膜機械性質",第九屆奈米工程暨微系統技術研討會;,( 2005)
  105. 鍾震桂*;吳志陽,"新型微混合器之設計與製作",第九屆奈米工程暨微系統技術研討會;,( 2005)
  106. 陳國聲;楊天,"CO2",中華民國,( 2005)
  107. 楊天,"水輔助雷射加工理論分析與最佳切割速度計算",中華民國,( 2005)
  108. P. J. Su*;C.K. Chung,"Amorphization of Ta-Al Films Using the Magnetron Sputtering",ICMCTF 2005;,( 2005)
  109. C.K. Chung*,"Effect of Amorphous Si Layer on the Reaction of Carbon and Silicon in the C/Si Multilayer by IBS under UHV",ICMCTF 2005;,( 2005)
  110. C.K. Chung*,"A Novel Fabrication of Ionic Polymer-Metal Composites (IPMC) Actuator with Silver Nano-Powders",Transducers 2005;,( 2005)
  111. C.K. Chung*,"Effect of pulse frequency on the morphology and nanoindentation property of electroformed Ni films",HARMST2005;,( 2005)
  112. C.K. Chung*,"Fabrication and analysis the reflowed microlens arrays using JSR THB-130N photoresist",HARMST2005;,( 2005)
  113. 陳國聲;楊天,"CO2",CSME2005;,( 2005)
  114. 楊天,"水輔助",CSME2005;,( 2005)
  115. 鍾震桂*,"應用田口方法於電鍍中夾具之電性分佈",CSME2005;,( 2005)
  116. 鍾震桂*,"CO2",CSME2005;,( 2005)
  117. 鍾震桂*;吳志陽,"側壁注入與渦",中國機械工程學會第二十二屆研討會;,( 2005)
  118. 鍾震桂*,"玻璃的快速深蝕刻技術之研究",CSME2005;,( 2005)
  119. 鍾震桂*,"氮氣流量比對鉭-矽-氮(TaSiN)奈米複合薄膜的微結構與機械性質之影響",第九屆奈米工程暨微系統技術研討會;,( 2005)
  120. T.S. Chen*;C.C. Peng;B.H. Wu;C.K. Chung,"The Nano-hardness and microstructure of tantalum silicon nitride (TaSiN) thin films by magnetron reactive co-sputtering",International Symposium on Nano Science and Technology;,( 2005)
  121. B.H. Wu*;T.S. Chen;C.K. Chung,"Nanomechanical properties of multilayers C/Si Nanocomposite",International Symposium on Nano Science and Technology;,( 2005)
  122. C.K. Chung*,"Formation of SiC Nano-particles in the C/Si multilayers",International Symposium on Nano Science and Technology;,( 2005)
  123. C.K. Chung*,"The bulge improvement of polymer in the CO2 laser micromachining",HARMST2005;,( 2005)
  124. C.K. Chung*,"Effect of seed layer stress on the fabrication of monolithic MEMS microstructure",HARMST2005;,( 2005)
  125. C.K. Chung*,"Fabrication of the monolithic polymer-metal microstructure by the backside exposure and electroforming technology",HARMST2005;,( 2005)
  126. C.K. Chung*,"Fabrication of Monolithic Microdroplet Injecting Chip",奈米工程暨微系統技術研討會;,( 2003)
  127. 鍾震桂*,"利用厚光阻和電鑄技術製作金屬與高分子的堆疊微結構",中國機械工程學會第二十屆全國學術研討會;,( 2003)
  128. 鍾震桂*,"鉭-矽-氮(Ta-Si-N)薄膜為奈結構特性與奈米壓痕硬度之研究",中國機械工程學會第二十屆全國學術研討會;,( 2003)
  129. 鍾震桂*,"共濺鍍法成長Ta-Al電阻材料的成份與特性研究",中國材料科學學會2003年年會;,( 2003)